Reductoare de presiune pentru Co2 , uz tehnic si profesional
e-mail :
Water Treatment System Orar L-V 09.00-17.00

Omnipure sediment filter USA in line 10" - 5 micron CL10PF5


Qty Discounts Off Price
Add to Cart:

  • Model: wts-k2505bb-cl10pf5
  • Manufactured by: Omnipure

Omnipure Model CL10PF5 line filter 10 "5 micron sediment.

Certified in accordance with ANSI / NSF Standard 42.

Laboratory results Omnipure
Parameter         Percent reduction approx Minimum percent reduction
Reduction of particle 2         98,8 96,5

1 tested using flow = 1.28 gpm; pressure = 60 psig; pH = 7,5 ± 0,5; temp. = 20 ° ± 2,5 ° C

2 Measuring particles/ml

Operating Specifications

Capacity: NA
Flow Rate: 0.50 GPM (1.9 LPM)
Maximum Pressure: 125 PSIG
Temperature: 35-100 F (2-38 C)

General Installation/Operation/Maintenance Requirements

  • Note flow direction of filter.
  • For quick connect fittings, push scratch free tube end into the fitting until it bottoms. Threaded fittings must be wrapped with Teflon™ tape before installation. Install Teflon™ taped fittings and tighten firm. Use two wrenches to firmly tighten tubing.
  • Flush new cartridge with 5 gallons of water prior to use and check for leaks. If leaks occur, check tightness of tubing and fittings. If leaks persist, discontinue use and call your supporting dealer.
  • Replace cartridge when rated capacity is reached, or when flow becomes too slow.
  • Install in compliance with state and local laws and regulations.

Special Notices

  • The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
  • Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Warranty Information
Omnipure Filter Company (Omnipure) warrants that the products delivered will be free from any defects in workmanship or materials. Further, the warranty provided herein applies, only when used within the products specifications and service life, from the date of installation, beyond which time or use Omnipure is absolved of any and all liability for any use of the product. In the event of defect or non-conformity, buyer shall promptly notify Omnipure in writing, supplying proof of purchase dates, installation dates, and will protect and retain the products for investigation, or Omnipure is absolved of any and all liability for any use of the product. There are no other warranties, either merchantability or fitness, either expressed or implied.


Copyright © 2019 WTS-magazin online filtre apa. Powered by WTS
Viziteaza site-ul pe ShopMania
Fitinguri cuple si racorduri din plastic si metal pentru furtun